دسترسی یکساله به بیش از ۵۰۰ ژورنال روز جهان موجود در سامانه
-
http://medilib.ir
- ﻣﺪﺕ ﺯﻣﺎﻥ : 365 ﺭﻭﺯ
قیمت : 4,800,000 تومان- قیمت ویژه : 2,400,000تومان
دسترسی ۳ ماهه به بیش از ۵۰۰ ژورنال روز جهان موجود در سامانه
-
http://medilib.ir
- ﻣﺪﺕ ﺯﻣﺎﻥ : 93 ﺭﻭﺯ
قیمت : 1,500,000 تومان- قیمت ویژه : 750,000تومان
Editorial Review Board
doi : 10.1016/S0022-3913(25)00822-4
Volume 134, Issue 5, November 2025, Page A1
Combining a CAD-CAM composite resin palatal wall with a direct composite resin layering technique for the restoration of a large Class IV fracture: A clinical report
Cavity preparation and cementation of indirect adhesive posterior restorations using three different composite resins with a one-year follow-up: A clinical report
Use of an autonomous robotic system for removal of fiber posts during endodontic retreatment: A clinical report
Fixed prosthodontic rehabilitation using a facially driven fully digital workflow of a patient with syndromic amelogenesis imperfecta associated with a rare form of ectodermal dysplasia, tricho-dento-osseous (TDO) syndrome
A polyetheretherketone framework removable partial denture for a 6-year-old child with nonsyndromic oligodontia made using glass-ceramic hemispheres to enhance retention: A clinical report
Application of digital virtual simulated design in the prosthodontic rehabilitation of a child with a novel EDA mutation in ectodermal dysplasia: A clinical report
Treatment planning algorithm for patients with a terminal dentition
Axial and tilted implant surgical technique assisted by an autonomous dental implant robot: A clinical report
Maxillary sinus floor elevation for implant placement assisted by an autonomous dental implant robotic system: A clinical report
Esthetic integration area concept in digitally guided veneer rehabilitation: A dental technique
A digital guide device to facilitate CAD-CAM veneer cementation for mandibular incisors: A dental technique
Digitally driven tooth reduction guide combined with chairside tooth preparation monitoring tool for veneer preparation: A dental technique
CAD-CAM pressure-exerting device to create an ovate pontic for an implant-supported fixed partial denture
A simplified digital workflow for the rapid design and fabrication of interim fixed prostheses using an open-access software program
The 4D virtual patient: A proof of concept in digital dentistry
A technique for correcting the implant analog position in the digitally printed definitive cast
Intraoral scanners as tracking devices: A dental protocol for assessing volumetric changes between intraoral scans
Digital intraoperative evaluation of restorative space and nontemplate-guided tooth preparation when replacing failed anterior restorations: A dental technique
A one-piece CAD-CAM printed custom implant healing abutment: A dental technique
Implant-supported prostheses following the biologically oriented preparation technique (BOPT) after implantoplasty procedures: A dental technique
Use of an optical jaw tracking system to capture the envelope of function when designing interim and definitive prostheses: A dental technique
True horizontal or gravity plane registration for transferring the maxillary scan into the virtual articulator by using a facial scanner without the need for an additional device
Locating centric occlusion by using intraoral scanners and open access or dental computer-aided design programs: A dental technique
Using a three-dimensional natural head position precise recording and transferring device to translate the natural head position into a 3-dimensional virtual patient: A dental technique
A digital approach to creating a positioning tray for a multiple implant impression and its clinical application: A dental technique
Superimposing digital arch scans onto cone beam computed tomography scans with metallic artifacts by applying a radiopaque occlusal registration material: A chairside dental technique
Creating a 3D diagnostic cast with realistic tooth shade and translucency using an open source nondental CAD software program: A dental technique
A digital in situ bone augmentation workflow for reconstructing the alveolar ridge outline using a modified shell technique
Digital workflow for fabricating an implant-supported overdenture with the custom disk method
A fully digital planning protocol for dynamic computer-assisted zygomatic implant surgery based on virtual surgery simulation: A dental technique
A digital technique to adjust the disc-condyle relationship based on CBCT-MRI fused 3D images
Digital workflow for the fabrication of custom-fit additively manufactured sports mouthguards with balanced occlusion using an optical jaw tracking system: A dental technique
Are CAD-CAM milled glass fiber posts better than prefabricated or custom glass fiber posts for endodontically treated teeth? A systematic review with meta-analysis
Tooth preparation-related factors that impact the accuracy of intraoral scanners for fabricating tooth-supported restorations: A systematic review
Factors affecting accuracy in the additive manufacturing of interim dental prostheses: A systematic review
Effect of three-dimensional print angle on integrity of interim crowns: A systematic review
Effect of postprocessing parameters on the flexural strength of vat-polymerized additively manufactured interim fixed dental prostheses: A systematic review with postprocessing guidelines
The application of 3D printing in dentistry: A bibliometric analysis from 2012 to 2023
Gingival zenith level, position, and symmetry: A systematic review and meta-analysis
Dental implant planning using artificial intelligence: A systematic review and meta-analysis
Accuracy assessment of robot-assisted dental implant surgery: An umbrella review of systematic reviews
Clinical outcomes of zirconia implants supporting multi-unit and complete arch prostheses: A systematic review and meta-analysis
Effectiveness of trans-sinus dental implants in the complete arch rehabilitation of the edentulous maxilla: A systematic review and meta-analysis
Immediate loading of definitive restorations in partially edentulous patients requiring an implant-supported prosthesis: A scoping review
Comparative effectiveness of interventions for the treatment of peri-implantitis: A systematic review with network meta-analysis
Long-term assessment of the periodontal health of removable partial denture wearers: A systematic review and meta-analysis
Do clasps made of thermoplastic polymers ensure adequate retention for removable partial dentures? A systematic review and meta-analysis
Comparison of masticatory performance and oral health-related quality of life between immediate and conventional loading protocols for an implant-supported mandibular overdenture: A systematic review and meta-analysis of randomized clinical trials
Effectiveness of postprocessing on 3D printed resin biocompatibility in prosthodontics: A systematic review
Incorporating versus coating antimicrobials for polymethyl methacrylate: A systematic review
Evaluation of clinical performance of additively manufactured and milled polyetheretherketone (PEEK) inlays compared with indirect composite resin inlays over a one-year follow-up: A randomized clinical trial
Survival time and success rates of customized prefabricated metal posts: A retrospective study
Restoration of teeth lacking complete ferrules using cast precious metal alloy post-and-cores and knife-edged crowns: A retrospective clinical study
Prospective cohort study to evaluate narrow diameter implants for the restoration of a missing maxillary lateral incisor in patients with a cleft palate: Five-year results
Clinical and biochemical assessment of the soft tissue response to titanium stock versus custom composite resin healing abutments
Interdisciplinary management of Type 3 oligodontia: A retrospective case series
Clinical evaluation of closed tray impression and intraoral scanning techniques in single posterior tissue-level implant-supported crowns: A self-controlled case study
Bone alteration and esthetics associated with implant-supported prostheses in the anterior maxilla under different implant placement timing: A retrospective clinical study of 1 to 3 years
Oral impact of dental prosthesis use in different patterns of tooth loss
Impact of adding zirconium oxide nanoparticles to the 3D printable acrylic resin base material for implant-retained overdentures: A clinical comparative parallel study
Analysis of risk factors related to early implant failure: A retrospective study
Reliability of planned occlusal contacts in complete arch rehabilitations at increased vertical dimension: A clinical comparison of intraoral scanning and jaw tracking protocols
Evaluation of the clinical performance of different occlusal device materials
Accuracy of an autonomous dental implant robotic system in placing tilted implants for edentulous arches
Removable partial dentures assisted by short implants: A 34-month randomized controlled clinical trial
Digital comparative analysis in three dimensions of two impression techniques for the bilateral distal extension of partially edentulous mandibular arches: A pilot clinical study
Adaptation of cobalt chromium frameworks fabricated by conventional versus selective laser melting techniques: An in vitro and clinical assessment
Evaluation of postextraction wound healing of immediate complete dentures using a modified inflammation proliferation remodeling scale following platelet-rich fibrin and xenograft application: A randomized clinical trial
Association of unreplaced missing posterior teeth with migraine or severe headaches in US adults: A cross-sectional population study
Antimycotic prophylaxis with multispecies probiotics against oral candidiasis in new complete denture wearers: A randomized clinical trial
A comparative assessment of condylar inclination in completely edentulous patients using cone beam computed tomography and Arcus digma II
Evaluation of the efficacy of pharmacological treatment in patients with temporomandibular joint dysfunctions using ultrasonography
A dental laboratory survey of clinical failure rates in zirconia and conventional restorations over six years
Influence of apical finish line location of tooth preparations on the scanning accuracy of intraoral scanners with various focal lengths and scanning technologies
Effect of different techniques on removal of residual resin cement and marginal roughness of porcelain laminate veneers
Different surface treatments on recently introduced CAD-CAM resin-modified ceramics: Implications on bond strength
Multifactorial analysis of the maxillary premolar area for immediate implant placement using cone beam computed tomography: A study of 333 maxillary images
Evaluation of different tightening protocols on angled screw channel abutments after cyclic loading: An in vitro study
Real-time optimization of prosthetic design for complete arch implant-supported treatments using finite element-based machine learning
Comparison between selective laser melted and cast removable partial denture frameworks
Development and accuracy assessment of a crown lengthening surgery robot for use in the esthetic zone: An in vitro study
Discrepancies of centric occlusion located by using a conventional method and four intraoral scanners combined with a computer-aided design program: A pilot investigation
Evaluation of color matching accuracy using artificial intelligence applications and a spectrophotometer: A photometric analysis
Evaluation of adherence of Candida albicans to differently manufactured acrylic resin denture base materials
Comparative laboratory study of 3D printed denture base resin materials
Influence of 3D printing parameters on surface roughness and stainability of a denture base resin: An in vitro study
Dental and bony changes following subtotal glossectomy for cancer: A clinical report
Fully integrated additive manufacturing of an obturator prosthesis for an edentulous patient with a maxillectomy defect
A digital workflow for fabricating a mandibular guide plane prosthesis for patients about to undergo hemimandibulectomy: A dental technique
Near field communication tag to provide a unique identification aid for custom ocular prostheses
Mechanical properties of tissue adhesives used for retaining extraoral silicone prostheses in maxillofacial defects: A systematic review
Impact of maxillofacial prosthetic rehabilitation on oral health-related quality of life for patients with oral cancer: A prospective case series
Factors associated with mandibular deviation and proposed classification and treatment guidelines for applying mandibular guidance: A retrospective analysis of 185 patients with segmental mandibulectomy
Predicting maximum occlusal force and tongue pressure using decision tree analysis in patients diagnosed with head and neck tumors
Rapid elastomeric radiographic template for CBCT and implant planning of a completely edentulous arch
Comments regarding Ereifej NS, Oweis YG, El Manaseer W, Al Omoush S, Abu Awwad M, Sartawi S. Simplified versus conventional complete dentures: A randomized crossover clinical trial. J Prosthet Dent 2024;131:50-5.
Letter to the editor in regard to the article “Effectiveness of oral moisturizing gel and flavor on oral moisture and saliva volume: A clinical study�
Concerns regarding the published article, “Can fiber placement influence the fracture resistance of endodontically treated teeth with indirect partial ceramic restorations? A systematic review and meta-analysis� by Abidrahamani et al.
Response to Letter to the Editor on the manuscript “Can fiber placement influence the fracture resistance of endodontically treated teeth with indirect partial ceramic restorations? A systematic review and meta-analysis�
