دسترسی یکساله به بیش از ۵۰۰ ژورنال روز جهان موجود در سامانه
-
http://medilib.ir
- ﻣﺪﺕ ﺯﻣﺎﻥ : 365 ﺭﻭﺯ
قیمت : 3,800,000 تومان- قیمت ویژه : 1,900,000تومان
Monolaurin-Loaded Gel-Like Microemulsion for Oropharyngeal Candidiasis Treatment: Structural Characterisation and In Vitro Antifungal Property
doi : 10.1208/s12249-022-02235-7
23, Article number: 87 (2022)
Recently, monolaurin (ML) has received great interest due to its possible use as an alternative antifungal. However, the limited water solubility of ML is still a major obstacle to its formulation and application. Gel-like microemulsions are one of the promising carriers for low-water-solubility substances due to both the advantages of gels and microemulsions and may be applied for ML. In this study, ML was incorporated into gel-like microemulsions and evaluated for its physicochemical and antifungal properties. The results indicated that the properties of gel-like microemulsion changed after the incorporation of ML, suggesting that ML can induce the transition of internal structure. When simulating the oral cavity environment, changes in the microstructure were observed and depended on the times of dilution. The lamellar structure was formed at 1.5–2 times dilution. However, this structure was disrupted after dilution five times or more. The structural change following dilution was associated with the release profiles. After contacting the formulations with the medium, ML was promptly released, with the majority of ML being released within 2 h. Regarding the antifungal assay, the ML-loaded gel-like microemulsions decreased the survival of Candida albicans within 3 h, although ML was immediately released, suggesting that the ML-loaded in oil droplets required time to permeate through the fungal cell wall. Additionally, the gel-like microemulsions possessed acceptable stability after the temperature cycling test. Therefore, gel-like microemulsions can be a possible carrier for ML loading, and ML-loaded gel-like microemulsions may be applied as an alternative antifungal preparation in the future.
Simulation Models for Prediction of Bioavailability of Medicinal Drugs—the Interface Between Experiment and Computation
doi : 10.1208/s12249-022-02229-5
23, Article number: 86 (2022)
The oral drug bioavailability (BA) problems have remained inevitable over the years, impairing drug efficacy and indirectly leading to eventual human morbidity and mortality. However, some conventional lab-based methods improve drug absorption leading to enhanced BA, and the recent experimental techniques are up-and-coming. Nevertheless, some have inherent drawbacks in improving the efficacy of poorly insoluble and low impermeable drugs. Drug BA and strategies to overcome these challenges were briefly highlighted. This review has significantly unravelled the different computational models for studying and predicting drug bioavailability. Several computational approaches provide mechanistic insights into the oral drug delivery system simulation of descriptors like solubility, permeability, transport protein-ligand interactions, and molecular structures. The in silico techniques have long been known still are just being applied to unravel drug bioavailability issues. Many publications have reported novel applications of the computational models towards achieving improved drug BA, including predicting gastrointestinal tract (GIT) drug absorption properties and passive intestinal membrane permeability, thus maximizing time and resources. Also, the classical molecular simulation models for free solvation energies of soluble-related processes such as solubilization, dissolutions, supersaturation, and precipitation have been used in virtual screening studies. A few of the tools are GastroPlusTM that supports biowaiver for drugs, mainly BCS class III and predicts drug compounds’ absorption and pharmacokinetic process; SimCyp® simulator for mechanistic modelling and simulation of drug formulation processes; pharmacodynamics analysis on non-linear mixed-effects modelling; and mathematical models, predicting absorption potential/maximum absorption dose. This review provides in silico-experiment annexation in the drug bioavailability enhancement, possible insights that lead to critical opinion on the applications and reliability of the various in silico models as a growing tool for drug development and discovery, thus accelerating drug development processes.
Enhanced Intramuscular Bioavailability of Cannabidiol Using Nanocrystals: Formulation, In Vitro Appraisal, and Pharmacokinetics
doi : 10.1208/s12249-022-02239-3
23, Article number: 85 (2022)
Cannabidiol (CBD) has poor water solubility and is subjected to extensive first-pass metabolism. These absorption obstacles are responsible for low and variable oral bioavailability of CBD. This study endeavored to improve CBD bioavailability by intramuscular (IM) injection of CBD nanocrystals (CBD-NC). The nanocrystals were prepared by antisolvent precipitation method and were characterized in terms of the particle size, polydispersity index (PDI), zeta potential, morphology, and crystalline status. CBD-NC displayed a particle size of 141.7±1.5 nm, a PDI of 0.18±0.01, and a zeta potential of −25.73 mV. CBD-NC freeze-dried powder using bovine serum albumin (BSA) as cryoprotectant had good redispersibility, and the average particle size was 139.1±1.4 nm after reconstitution. Moreover, these freeze-dried powders were characterized for drug loading and pH and were evaluated for in vitro dissolution and in vivo studies in a rat model. The in vivo results showed that AUC0–24 h and Cmax of CBD by IM injection of CBD nanocrystals increased significantly compared with that of oral (P.O) administration of CBD nanocrystals and CBD oil solution. This underlines the nano-sized CBD could be suggested as a practical and simple nanosystem for IM delivery with improved bioavailability. More importantly, these results pave the way for future development of CBD-NC retentive dosage forms.
Transdermal Delivery of Baclofen Using Iontophoresis and Microneedles
doi : 10.1208/s12249-022-02232-w
23, Article number: 84 (2022)
Baclofen, a GABAb agonist, is used in the treatment of multiple sclerosis, a neurodegenerative disease. Currently available dosage forms to deliver baclofen are through the oral and the intrathecal routes. The disadvantage of oral baclofen is that it requires administering the drug multiple times a day, owing to baclofen’s short half-life. On the other hand, intrathecal baclofen pumps are invasive and cannot be an alternative to oral baclofen. Hence, there is a need to develop a dosage form that can deliver baclofen non-invasively and for an extended period at a steady rate, increasing the dosing interval. A transdermal baclofen delivery system might be the solution to this problem. Hence, this research focuses on evaluating microneedles, iontophoresis, and a combination of microneedles-iontophoresis as transdermal delivery enhancement strategies for baclofen. In vitro permeation studies were conducted on dermatomed porcine ear skin using vertical Franz diffusion cells to evaluate transdermal baclofen delivery. Anodal iontophoresis was applied at a current density of 0.5 mA/cm2, and transdermal delivery was assessed from pH 4.5 (45.51±0.76 μg/cm2) and pH 7.4 (68.84±10.13 μg/cm2) baclofen solutions. Iontophoresis enhanced baclofen delivery but failed to reach target delivery. Maltose microneedles were used to create hydrophilic microchannels on the skin, and this technique enhanced baclofen delivery by 89-fold. Both microneedles (447.88±68.06 μg/cm2) and combination of microneedles – iontophoresis (428.56±84.33 μg/cm2) reached the target delivery range (222–1184 μg/cm2) for baclofen. The findings of this research suggest that skin could be a viable route for delivery of baclofen.
One-Way Intestinal Perfusion of PVP/VA–Poloxamer 188–Curcuma longa L. Extract Solid Dispersion in Rats In Vivo and Its Effect on HSC–T6 Cell Proliferation
doi : 10.1208/s12249-022-02228-6
23, Article number: 83 (2022)
Turmeric was the dried rhizome of Curcuma longa L., and its extract had important pharmacological effects such as anti-tumor, cholagogic, and antioxidant. However, curcuma extract had poor water solubility and low bioavailability, which had become the main limiting factor for its clinical application. The purpose of this study was to prepare PVP/VA–Poloxamer–188–curcuma extract solid dispersion (PAP–CSD) to improve the solubility and bioavailability of the curcuma extract. The intestinal absorption mechanism of solid dispersion of this extract was studied by one-way intestinal perfusion in rats. PAP–CSD,PVP/VA–curcuma extract solid dispersion (PA–CSD) and Poloxamer–188–curcuma extract solid dispersion (P–CSD) was able to improve the intestinal absorption of the curcuma extract (P < 0.05), and PAP–CSD (combined use of two carriers) was better than that of PA–CSD and P–CSD. CCK8 method was used to investigate the effects of the curcuma extract and PAP–CSD on the proliferation of hepatic stellate cells (HSC)–T6 cells. The inhibitory effect of PAP–CSD on the proliferation of HSC-T6 cells, related to the p38 MAPK pathway, was better than that of the curcuma extract.
Release of Ropinirole in Acrylate Transdermal Patches: Mutual Interactions Between Formulation Variables
doi : 10.1208/s12249-022-02238-4
23, Article number: 82 (2022)
The aim of this study is to evaluate the cooperative interactions between formulation variables of ropinirole transdermal patches and characterize the effects of drug loading and crystallinity, degree of ionization and drug-polymer solubilization, functionalization of acrylate polymeric basis, and the addition of permeation enhancers over the release profiles. Several series of transdermal films based on carboxylic or hydroxylic acrylates (DuroTak®) and containing 1 to 10% ropinirole hydrochloride were laminated by mold-casting and evaporation. Formulations were characterized for crystallinity, drug particle size, drug assay, and residual solvents. Release profiles were obtained at different drug ionization state using paddle over disk apparatus. Mechanisms were elucidated with nonlinear data fitting of relevant release equations. Fickian and erosion processes were evaluated with the Peppas–Sahlin equation, and burst release risks were estimated as an independent term added to Higuchi kinetics. X-ray diffraction and microscopy evidenced differences in drug-polymer solubilization and density of drug crystals. Concerning drug release, area under the curve of dissolved quantities and release percentage were discriminant variables in mutual influence. Peppas–Shalin equation was the majority descriptor of release suggesting a combination of Fickian and erosion processes, revealing a decrease in the Fickian component as drug loading increased. Major burst release risks were evidenced mostly with Higuchi kinetics with vinylacetate acrylates. The carboxylic polymer without vinylacetate provided the best release extent, being more highly efficient as lower the drug loading was. Permeation enhancers with carboxylic or aliphatic radicals have, additionally, modified the release properties of ropinirole. Chemical interactions between the drug and acrylic polymers have been demonstrated. Only the effect with carboxylic polymer is pH dependent. The vinyl acetate comonomer reduces the drug release rate most effectively in formulations with low drug loads. The acrylic polymers without vinylacetate achieved the highest drug solubilization and thus the highest degree of release, providing a release of approximately 15% of the drug load.
Atorvastatin Entrapped Noisome (Atrosome): Green Preparation Approach for Wound Healing
doi : 10.1208/s12249-022-02231-x
23, Article number: 81 (2022)
The present study aimed to formulate atorvastatin niosome (Atrosome) through an ultrasonic technique and to determine its contribution to the extent of wound healing in an animal model. The optimized Atrosome formulation (Atrosome-2) was stable at 4 °C for 3 months. Differential scanning calorimetry (DSC), ATR-Fourier transform infrared spectroscopy (ATR-FTIR), and powder X-ray diffraction (PXRD) analysis revealed that atorvastatin (ATR) was well encapsulated within the niosomes either in a stabilized amorphous form or a molecularly dispersed state. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscope (AFM) confirmed the spherical nature of the Atrosomes. The optimized formulation showed polydispersity index, particle size, drug encapsulation efficiency (EE%), and zeta potential of 0.457 ± 0.05, 196.33 ± 6.45 nm, 86.15 ± 0.58 %, and − 20.73 ± 0.98 mV, respectively. ATR release from the Atrosome gel followed the first-order kinetic model and showed no cytotoxicity in the in vitro cytotoxicity test. Cell viability (human foreskin fibroblast cell line) was nearly 99%. An excision wound model was also applied in male Wistar rats to examine the in vivo efficacy of the optimized formulation, followed by investigating malondialdehyde (MDA, an end-product of lipid peroxidation), superoxide dismutase (SOD, an endogenous antioxidant), hydroxyproline levels, and glutathione peroxidase (GPx) in skin tissue samples. MDA significantly decreased in the Atrosome gel group after 21 days, while GPx, SOD, and hydroxyproline levels demonstrated an increase. According to histological results, rats receiving Atrosomes were treated effectively faster when compared to the other formulation used.
An Insight into Eudragit S100 Preserving Mechanism of Cinnarizine Supersaturation
doi : 10.1208/s12249-022-02223-x
23, Article number: 80 (2022)
Generally, supersaturation of weakly basic drug solution in the gastrointestinal tract can be followed by precipitation, and this can compromise the bioavailability of drugs. The purpose of this study was to evaluate the effect of Eudragit® S100 on the pH-induced supersaturation of cinnarizine and to examine the preserving mechanism of cinnarizine supersaturation by Eudragit®. Variables, including pH of media, ionic strength, and degree of supersaturation, were studied to investigate the effects of these parameters on cinnarizine supersaturation in the presence and absence of Eudragit®. The size of the Eudragit® aggregate in solution using dynamic light scattering was determined. The effect of Eudragit® on the transport of cinnarizine through the Caco-2 membrane was also investigated. The particle size study of Eudragit® aggregates showed that the size of these aggregates become large when the pH was lowered. Supersaturation experiments also demonstrated that Eudragit® preserved higher cinnarizine supersaturation with increasing ionic strength of the solution. The phase separation behavior of cinnarizine solution as a function of the degree of the supersaturation could be readily explained by considering the drug amorphous solubility. In vitro permeation studies revealed that the rate of cinnarizine permeation across Caco-2 cells increased in the presence of Eudragit®. According to the obtained results, the aggregation status of Eudragit® and nonspecific hydrophobic cinnarizine-Eudragit® interactions seemed to be essential in determining the effect of Eudragit® on cinnarizine supersaturation.
Preparation and In Vitro and In Vivo Evaluation of a Testosterone Film Forming Gel for the Treatment of Hypoactive Sexual Desire Disorder in Women
doi : 10.1208/s12249-021-02201-9
23, Article number: 79 (2022)
Hypoactive sexual desire disorder (HSDD) is one of the most common sexual complaints in women. Currently, there is an unmet need for a drug treatment for this disorder. The purpose of this study was to develop a testosterone (TS) film forming gel used for women to treat HSDD by measuring the tackiness, peel adhesion force, tensile strength, and elasticity of the formulation. Diethylene glycol monoethyl ether (Transcutol P), an efficient penetration enhancer, was added to the optimized formulation and the transdermal permeation characteristics in vitro were studied using Franz-diffusion cells. The quantitative determination of TS was performed by high-performance liquid chromatography (HPLC). After 24 h, Transcutol P at 3% had the largest cumulative amount of drug and enhancement ratio of TS of 75.14 μg/cm2 and 2.82, respectively. After the screening of film forming polymers and penetration enhancers, the optimal formulation was as follows: glycerol (1%, w/w); 12.5% sodium carboxymethylcellulose (CMC-Na) aqueous solution (0.5%, w/w); 2.5% Carbomer ethanol solution (0.5%, w/w); Transcutol P ethanol solution (3%, w/w) containing 0.5% TS; and 8% Poly vinyl alcohol (PVA) aqueous solution (30%, w/w). The optimized film forming gel had good uniformity and the release of TS in vitro was close to 100% within 24 h. In vivo studies showed the formulations had optimal area under blood drug concentration curve values in the order of 3% Transcutol P > 1% Transcutol P > 5% Transcutol P > control preparation. The formulation with 3% Transcutol P provided the highest permeation effect both in vitro and in vivo. The safety of this formulation was further evaluated with a skin irritation test. It could effectively improve the rabbit skin irritation observed with a marketed transdermal patch Androderm®. The present study provides a promising approach for the development of a novel TS film forming gel for the treatment of HSDD in women.
Nanosized-Loratadine Embedded Orodispersible Films for Enhanced Bioavailability: Scalable Preparations and Characterizations
doi : 10.1208/s12249-022-02230-y
23, Article number: 78 (2022)
The patient-centric strategy urges the pharmaceutical companies to develop orodispersible films (ODF) as a new approach for pediatrics. However, the most common ODF-fabricated method, solvent casting, is facing the safety challenges of safety during manufacturing. To obtain favorable formulations with the ease of use and rapid dissolution, nanotechnology has been accounted for the development process. In this work, we investigated the wet-milling technique in preparing nanocarriers for loratadine—a hydrophobic anti-histamine drug. The results showed that the wet-milling technique could produce nanocarriers at the size of 400 nm. The reduction of particle size induced the increase of solubility and the dissolution rate of loratadine. Moreover, the pre-formulation of nanosized materials could adapt to the preparation of orodispersible films that disintegrated (less than 60s) and dissolved quickly. The DSC results showed that after the milling process, the crystallinity of loratadine was unchanged; however, the reduction in size induced an enhancement of drug bioavailability. After orally administrated to rats, the drug was quickly reached to the blood circulation, just after 30 min. Cmax increased from 44.97 ng/mL for the raw drug to 101.02 ng/mL for the nanocrystal leading to an enhancement of the AUC0-24h by 5.69-fold when the nanocrystal ODF was administrated. The ease of formulation and the improvement of drug solubility as well as bioavailability potentiated orodispersible films as a promising drug delivery for loratadine.
Mupirocin-Loaded Chitosan Microspheres Embedded in Piper betle Extract Containing Collagen Scaffold Accelerate Wound Healing Activity
doi : 10.1208/s12249-022-02233-9
23, Article number: 77 (2022)
This study reports the formulation of mupirocin-loaded chitosan microspheres embedded in Piper betle extract containing collagen scaffold as combinational drug delivery for improved wound healing. Selection of chitosan type (molecular weight and degree of deacetylation) was carried out based on their antibacterial efficacy. The low molecular weight chitosan was selected owing to the highest antibacterial action against gram-positive as well as gram-negative bacteria. Low molecular weight chitosan-microspheres showed spherical shape with largely smooth surface morphology, 11.81% of mupirocin loading, and its controlled release profile. The XRD, DSC thermograms, and FT-IR spectral analysis revealed the mupirocin loaded in molecularly dispersed or in amorphous form, and having no chemical interactions with the chitosan matrix, respectively. The in vivo study indicates potential effect of the mupirocin, Piper betle, and chitosan in the collagen scaffold in the wound healing efficiency with approximately 90% wound healing observed at the end of 15 days of study for combinational drug-loaded chitosan microspheres-collagen scaffold-treated group. The histopathology examination further revealed tissue lined by stratified squamous epithelium, collagen deposition, fibroblastic proliferation, and absence of inflammation indicating relatively efficient wound healing once treated with combinational drug-loaded chitosan microspheres containing scaffold.
A Nanocrystal Platform Based on Metal-Phenolic Network Wrapping for Drug Solubilization
doi : 10.1208/s12249-022-02220-0
23, Article number: 76 (2022)
The preparation of drugs into nanocrystals represents a practical pharmaceutical technology to solubilize poorly water-soluble drugs and enhance bioavailability. However, commonly used stabilizers in nanocrystals like polymers and surfactants are frequently inefficient and cannot stabilize nanocrystals for an expected time. This study reports an exquisite platform for nanocrystal production based on a metal-phenolic network (MPN). MPN-wrapped nanocrystal particles (MPN-NPs) were fabricated through an anti-solvent precipitation method using tannic acid and FeIII or AlIII as coupling agents and characterized by dynamic light scattering, transmission electron microscope, ultraviolet and visible spectrophotometry, fourier-transform infrared spectroscopy, and X-ray powder diffraction. In vitro release, cytotoxicity, and stability were mainly studied with MPN-NPs loading paclitaxel. The suitability of MPN as a nanocrystal stabilizer was also investigated for other classical hydrophobic drugs, including simvastatin, andrographolide, atorvastatin calcium, ferulic acid, and famotidine. The results showed that MPN could effectively wrap and stabilize various drug nanocrystals apart from famotidine. The maximum solubilization of MPN towards atorvastatin calcium was up to 1587 folds, and it also exhibited an excellent solubilizing effect on other hydrophobic drugs. We disclosed that the drug was entrapped in MPN in the nanocrystal form, and there were distinct physiochemical interactions between MPN and the payload. Our findings suggested that MPN may be a promising platform for nanocrystal production to address the challenge of low solubility associated with hydrophobic drugs.
