دسترسی یکساله به بیش از ۵۰۰ ژورنال روز جهان موجود در سامانه
-
http://medilib.ir
- ﻣﺪﺕ ﺯﻣﺎﻥ : 365 ﺭﻭﺯ
قیمت : 3,800,000 تومان- قیمت ویژه : 1,900,000تومان
Assessment of predictive performance of caries risk assessment models based on a systematic review and meta-analysis
NaichuanSuaMaxim D.LagerweijbGeert J.M.G.van der Heijdena
doi : 10.1016/j.jdent.2021.103664
Volume 110, July 2021, 103664
To assess the predictive performance of caries risk assessment (CRA) models for prediction of caries increment for individuals based on a systematic review and meta-analyses.
A novel non-destructive technique for qualitative and quantitative measurement of dental erosion in its entirety by porosity and bulk tissue-loss
Mathew J.F.HookhamaRichard J.M.LynchbDeclan P.Naughtona
doi : 10.1016/j.jdent.2021.103688
Volume 110, July 2021, 103688
To explore the potential of combining non-contact profilometry (NCP) and confocal laser scanning microscopy (CLSM) data to measure the entire erosive process non-destructively and to validate findings using inductively coupled plasma-atomic emission spectroscopy (ICP-AES), scanning electron microscopy (SEM) and surface microhardness (SMH) using the same samples throughout.
A cost minimisation analysis of two dental sealing methods in an outreach dental program
BaoyingLiuWenkeWang
doi : 10.1016/j.jdent.2021.103687
Volume 110, July 2021, 103687
To conduct economic evaluation of two sealing methods (placement of resin sealant or glass ionomer ART sealant) in preventing pit and fissure caries in permanent first molars (PFMs) in schoolchildren.
Glass hybrid versus composite for non-carious cervical lesions: Survival, restoration quality and costs in randomized controlled trial after 3 years
FalkSchwendickeaAnneMülleraTilmannSeifertbLinda-MariaJeggle-EngbertcSebastianParisdGerdG?stemeyerd
doi : 10.1016/j.jdent.2021.103689
Volume 110, July 2021, 103689
This study compared survival, restoration quality and costs of glass hybrid (GH; EQUIA Forte Fil/EQUIA Forte Coat) and resin composite restorations (RC; OptiBond FL/Filtek Supreme XTE) of sclerotic non-carious cervical lesions.
Current and future trends in the teaching of direct posterior resin composites in Malaysian dental schools: a cross-sectional study
PreenaSidhuaOmer SheriffSultanaSwarna YerebairapuraMathbNormaliza AbMalikcNairn H.F.WilsondChristopher D.LyncheIgor R.BlumfUmerDaooda
doi : 10.1016/j.jdent.2021.103683
Volume 110, July 2021, 103683
To investigate the current and future teaching of posterior composite restorations in undergraduate curricula in Malaysian dental schools.
Detection and analyzing plane of non-cavitated approximal caries by cross-polarized optical coherence tomography (CP-OCT)
HaixiaXingabGeorge J.EckertcMasatoshiAndob
doi : 10.1016/j.jdent.2021.103679
Volume 110, July 2021, 103679
The objective was to assess the detection ability and the effect of analyzing plane of CP-OCT for non-cavitated approximal caries.
ISO 4049 versus NIST 4877: Influence of stress configuration on the outcome of a three-point bending test in resin-based dental materials and interrelation between standards
NicoletaIlie
doi : 10.1016/j.jdent.2021.103682
Volume 110, July 2021, 103682
The study aimed to find a relationship between the most common standards used in testing resin-based materials (RBC) in a three-point bend test - ISO 4049 and NIST 4877 - using a size-strength relationship defined by the Weibull model. The direct comparison of calculated and measured data is used for validation.
Reduction of hsCRP levels following an Oral Health Education Program combined with routine dental treatment
Eman S.AlmabadiabGregory J.SeymourcRahenaAkhterdAdrianBaumaneMary P.CullinancJoergEberharda
doi : 10.1016/j.jdent.2021.103686
Volume 110, July 2021, 103686
The present study aimed to determine the effect of a personalised oral health education program, in combination with routine dental treatment, on serum biomarkers of systemic disease compared to dental treatment alone in a population from a low-socioeconomic community with poor oral health.
A nationwide survey assessing the satisfaction of dental colleges graduates with their undergraduate experience in Saudi Arabia
Abdulmonem A.AlshihriaDaliah M.SalembTalal M.AlnassaraNawal M.AlharbiaChristopher D.LynchcIgor R.BlumdNairn H.F.WilsoneMohammed S.Aldossaryf
doi : 10.1016/j.jdent.2021.103685
Volume 110, July 2021, 103685
To date, there are no publications on the Saudi graduates’ perceived value of their dental curriculum. The aim of this nation-wide survey was to investigate graduates’ satisfaction with specific disciplines of their dental education and training. The first part of this study addressed findings according to the respondents’ gender and the number of years of postgraduate experience (Graduate-related factors).
Facial scanning accuracy depending on the alignment algorithm and digitized surface area location: An in vitro study
MartaRevilla-Le?nabcJorge AlonsoPérez-BarquerodBasir A.BarmakeRubénAgust?n-PanaderodLuc?aFern?ndez-EstevandWaelAttf
doi : 10.1016/j.jdent.2021.103680
Volume 110, July 2021, 103680
To measure the accuracy (trueness and precision) of a facial scanner depending on the alignment method and the digitized surface area location.
Accuracy of 3D printing compared with milling — A multi-center analysis of try-in dentures
ChristopherHerpelaAkinoriTasakabgShizuoHiguchicDominicFinkedReinaldKühleeKentoOdakafStefanRuesaChristopher J.LuxdShuichiroYamashitabPeterRammelsbergaFranz SebastianSchwindlinga
doi : 10.1016/j.jdent.2021.103681
Volume 110, July 2021, 103681
In recent years, computer-aided design/computer-aided manufacturing (CAD/CAM) has been used to produce removable complete dentures. Most workflows include fabrication of milled or 3D-printed try-in prostheses. 3D-printing accuracy is affected by laboratory-specific and operator-dependent factors. This international five-center study sought to compare the accuracy of 3D-printed and milled try-in dentures.
The accuracy of single implant scans with a healing abutment-scanpeg system compared with the scans of a scanbody and conventional impressions: An in vitro study
BurakYilmazabcDiogoGouveiacVinicius RizzoMarquesaEmreDikerdeMartinSchimmelfgSamirAbou-Ayashf
doi : 10.1016/j.jdent.2021.103684
Volume 110, July 2021, 103684
To compare the accuracy of polyvinylsiloxane (PVS) impressions and intraoral scans when a healing abutment-scanpeg system (HASP) or a conventional scanbody (CSB) was used on a single implant.
Influence of rescanning mesh holes and stitching procedures on the complete-arch scanning accuracy of an intraoral scanner: An in vitro study
MiguelG?mez-PoloaWenceslaoPiedra-Casc?nbMohammed M.MethanicNievesQuesada-OlmodMercedesFarjas-AbadiaeMartaRevilla-Le?nfg
doi : 10.1016/j.jdent.2021.103690
Volume 110, July 2021, 103690
To measure the impact of different scanning patches on the accuracy (trueness and precision) of an intraoral scanner (IOS).
