دسترسی یکساله به بیش از ۵۰۰ ژورنال روز جهان موجود در سامانه
-
http://medilib.ir
- ﻣﺪﺕ ﺯﻣﺎﻥ : 365 ﺭﻭﺯ
قیمت : 4,800,000 تومان- قیمت ویژه : 2,400,000تومان
پکیج دسترسی ۳ ماهه به بیش از ۵۰۰ ژورنال روز جهان موجود در سامانه
-
http://medilib.ir
- ﻣﺪﺕ ﺯﻣﺎﻥ : 93 ﺭﻭﺯ
- :
قیمت : 1,500,000 تومان- قیمت ویژه : 750,000تومان
Effect of different wound closure interventions on the clinical outcomes following immediate implant placement in the aesthetic area: A network meta-analysis based on thirty-four studies
The use of antibiotics in the management of odontogenic facial swellings in children and adolescents: A scoping review
White diet is not necessary during dental bleaching treatment: A systematic review and network meta-analysis of clinical studies
Exploring ageism and elderly care in dentistry: A comprehensive scoping review
Accuracy of detection methods for secondary caries around direct restorations: A systematic review and meta-analysis
Trends in pH-triggered strategies for dental resins aiming to assist in preventing demineralization: A scoping review
The application of quantum dots in dental and oral medicine: A scoping review
Factors associated with the success of restorative treatment for root caries: A systematic review with meta-analysis
The Effectiveness of Platelet Rich Fibrin in Alveolar Ridge Reconstructive or Guided Bone Regenerative Procedures: A Systematic Review and Meta-Analysis
Preventive potential of arginine incorporated in fancy waters for erosive tooth wear
Indexing status of orthodontic research published in presumed predatory journals: A bibliometric study
The impact of malocclusion on tooth loss over a 20-year period: Findings from the Population-Based Study of Health in Pomerania (SHIP)
Effect of index thickness on the accuracy of direct restorations using composite resin injection technique with VPS indices
Orifice barrier preferences for coronal restoration of root filled teeth by endodontists and other dental practitioners in Australia: A questionnaire survey
The microbial co-infection interaction network in apical periodontitis with sinus tracts
Influence of the extension of the anchorage surface of mandibular overdentures on patient's quality of life and satisfaction: 5-year follow-up of a randomized clinical trial
Dental resin for periodontal and tooth root regeneration via metformin to enhance osteogenic and cementogenic differentiation of human periodontal ligament stem cells
Prediction based on machine learning of tooth sensitivity for in-office dental bleaching
Atraumatic restorative treatment induces transient changes in salivary total protein and redox biomarkers in children with caries: A non-randomized clinical study
Cost-effectiveness-analysis of oral health remotivation and reinstruction in nursing homes in a cluster-randomized controlled trial
Clinical performance of an ormocer-based single-shade resin composite for the restoration of non-carious cervical lesions: 18-month randomized clinical trial
Tideglusib enhances ALP activity and upregulates RANKL expression in Osteoblast-macrophage Co-cultures within a 3D collagen scaffold
What is the influence of the operator on the long-term survival of posterior partial lithium disilicate restorations in an undergraduate setting?
A novel AI model for detecting periapical lesion on CBCT: CBCT-SAM
Health literacy, oral diseases, and contributing pathways: results from the Lifelines Cohort Study
Survival of dental implants placed in a postgraduate educational setting: a retrospective cohort study
Clinical performance of different adhesion strategies in non-carious cervical lesion restorations: A four-year randomized clinical trial
Six-year clinical evaluation of a copper-containing universal adhesive in non-carious cervical lesions: A split-mouth double-blind randomized clinical trial✰
Effects of cannabidiol on biomineralization and inflammatory mediators expression in immortalized murine dental pulp cells and macrophages under pro-inflammatory conditions
Clinical efficacy of maxillary digital removable partial dentures based on direct intraoral scanning and selective laser melting technology: a double-blind randomized controlled crossover clinical trial
Longitudinal observational digital analysis of occlusion in Hall Technique
Accuracy of periapical radiography with improvement filters in the detection of bone graft loss around dental implants
Resin infiltration of trauma-induced enamel cracks – a proof-of-concept
Scientific trends in clinical trials on tooth bleaching: A bibliometric and altmetric review
Biological and chemical properties of new multi-functional root canal irrigants
In vivo comparison of resin infiltration outcomes under different light conditions: A randomized controlled clinical trial
Assessment of silver-copper co-loaded mesoporous bioactive glass as an advanced pulp-capping material
Accuracy of digital and conventional implant impressions in edentulous jaws: A clinical comparative study
Extended reality technology for alleviating adult dental anxiety: A systematic review and meta-analysis of randomized controlled trials
Positive reinforcement: Balancing negative and positive feedback for comprehensive improvement
Association between non-carious cervical lesions, dentin hypersensitivity and anxiety in young adults: A cross-sectional study
Qualitative and quantitative assessment of tooth wear in young individuals
Thermographic images for screening oral health problems in older adults: A pilot study
Artificial intelligence for dental implant classification and peri-implant pathology identification in 2D radiographs: A systematic review
Comparison of fit and trueness of single-unit and short-span fixed dental restorations fabricated by additive and subtractive manufacturing—A systematic review and meta-analysis
Enhancing dental education with a 3D point cloud comparison and augmented reality for auto-evaluation of fixed prosthodontic practice: An in vitro study
In vivo prospective randomised study of the wear of dental restorations using an intraoral scanner and its correlation with visual assessment.
In vitro assessment of an intraoral scanner accuracy on abutments with horizontal preparation geometries and subgingival margins
Automated dental registration and TMJ segmentation for virtual surgical planning of orthognathic surgery via three-step computer-based method
Assessment of operator performance during dynamically guided osteotomy and root-end resection in endodontic microsurgery: A cross-sectional in vitro study
Assessment of clinical reproducibility for intraoral scanning on different anatomical regions for the complete maxillary edentulous arch with two intraoral scanners
Comparative accuracy of dCAIS and freehand techniques for immediate implant placement in the maxillary aesthetic zone: An in vitro study
Evaluation of the fabrication trueness and internal fit of additively manufactured two-piece zirconia abutments with different build orientations compared to subtractively manufactured abutments
A personalized periodontitis risk based on nonimage electronic dental records by machine learning
Application of 3D-printed resin guides for the removal of molar fiber posts
Clinical precision of Aoralscan 3 and Emerald S on the palatal and dentition areas: Evaluation for forensic applications
Digital vs. conventional removable complete dentures: A retrospective study on clinical effectiveness and cost-efficiency in edentulous patients: Clinical effectiveness and cost-efficiency analysis of digital dentures
Development and validation of an AI-driven tool to evaluate chewing function: a proof of concept
Impact of scanning interruptions on accuracy of implant-supported full-arch scans: An in-vitro pilot study
3-Dimensional quantitative analysis of mandibular motion in TMD and healthy subjects: Comparison with clinical observations
A double-blind randomized crossover trial comparing the esthetic outcomes of CAD-CAM provisional restorations fabricated using CBCT and IOS acquisition methods
Validation of a novel tool for automated tooth modelling by fusion of CBCT-derived roots with the respective IOS-derived crowns
Clinical evaluation of the accuracy of two face scanners with different scanning technologies
Scan accuracy of recently introduced wireless intraoral scanners in different fixed partial denture situations
Feasibility, trueness and precision of intraoral scanners in digitizing maxillectomy defects with exposed zygomatic implants in situ: An in vitro 3D comparative study
Load-bearing capacity of screw-retained fixed dental prostheses made of monolithic zirconia on different abutment designs and abutment-free implant connection
Application of automated face coding (AFC) in older adults: A pilot study
3D printed endocrowns versus prefabricated zirconia crowns for pulpotomized primary molars: A randomized controlled trial
Corrigendum to “A feasibility study to recruit, retain and treat periodontitis in volunteers with mild dementia, whilst monitoring their cognition� [Journal of Dentistry, 150 (2024) 105355]
